JK Rear Axle Bracket Kit Complete 07-18 Wrangler JK/JKU Synergy MFG

Synergy Jeep JK HD Rear Axle Bracket Kit includes the following items gathered together for this kit
Details:
Fits 07-18 Wrangler JK and Wrangler Unlimited JK
Synergy Jeep JK Weld-On Rear Track Bar Bracket - (8072-01)

• Weld-On rear track-bar bracket designed to replace the weak factory JK track bar bracket
• Replace the thin factory brackets on a stock axle or use for swapping any axle into a JK
• Multiple Track-bar holes for suspension adjustments
• Designed to fit stock JK axle tubes, 3.150 inch diameter
• Will fit other diameter axle tubes with minor trimming

Synergy Jeep JK Rear Weld-On Bump Stop Bracket - (8072-02)

• Weld-On bracket designed to utilize JK style bump stop spacers and retain factory emergency brake cables
• Great for swapping any axle into a JK
• Designed to fit stock JK axle tubes, 3.150 inch diameter
• Will fit other diameter axle tubes with minor trimming

Synergy Jeep JK Weld-on Rear Upper Control Arm Bracket - (8072-03)

• Weld-On bracket designed to mimic factory JK upper control arm bracket on any axle
• Replace the thin factory brackets on a stock axle or use for swapping any axle into a JK
• Designed to fit stock JK axle tubes, 3.150 inch diameter
• Will fit other diameter axle tubes with minor trimming

Synergy Jeep JK Weld On Rear Lower Control Arm Axle Bracket Kit (8072-04)

• Replace bent and broken stock RLCA brackets or use to swap in an entirely different axle.
• CNC laser cut and bent out of high strength 3/16 inch steel
• Designed to fit stock JK axles (3.150 inch axle tube diameter) but can be trimmed to fit other axle tube sizes from 3.0 inch to 3.25 inch

Synergy Jeep JK Rear Axle Spring Pad - (8098)

• These rear axle spring pads are used to correct the spring angle when lifting your JK
• They feature a coil retainer which keeps the coil from popping off the lower spring pad during extreme articulation
• Designed to fit stock JK rear housings (3 1/8 inch axle diameter)