The toughest snatch block, just got tougher! Tuff Stuff is proud to introduce the best pulley snatch block on the market! Made from 100% cold rolled press bent 1/4 inch steel with a rugged textured black finish, this snatch block is some serious business!
With its CNC machined roller, V groove, spindle and oversized shoulder nut for maximum durability and strength, this pulley has been tested up to 15 TONS safely, with its 1.5:1 rating! With a WLL (working load limit) of 10 Tons, this snatch block is a must have for the serious off-roader or recovery service. The greasable zirk fitting is perfect for keeping the pulley operating smoothly and efficiently on the trail and its CNC machined parts lubricated for years of use.
The Tuff Stuff 10 ton Heavy Duty snatch block uses a 1 inch hole fitting for attaching your D shackle safely and securely with no movement.
Why use a shoulder nut, instead of a snap ring on your snatch block inch Snap rings are a known failure point on conventional snatch blocks when the load shifts against the bearings side. Snap rings can buckle under load causing the snatch block to fail which can result in catastrophic injuries. Rely on TUFF STUFF to keep you safe!
Do I Really Need A Snatch Block?
Yes! A snatch block should be an essential item in any winch or recovery kit. With a V-grooved channel in the pulley, the Tuff Stuff snatch block can accept a variety of cable sizes up to 1/2 inch (approx 10.5mm) in diameter.
A Tuff Stuff snatch block enables your winch to retrieve loads that are normally double a winch's capacity by cutting the load in half (by spreading the weight between 2 points). A snatch block will also help to winch from varying angles to not damage your rope or cable when a straight-ahead pull is not an option. To increase the longevity of a winch motors life, a snatch block can be used to reduce heat build-up by lowering amp draw which is the most common reason for winch failure.
Snatch block Features and Benefits:
- Designed for indirect winch line pulls
- Constructed from 1/4 inch cold rolled press bent steel
- Heavy Duty CNC machined moving parts
- 1 inch shackle pin hole diameter
- Highly durable Weather resistant textured black powder-coat finish to resist corrosion
- Accepts up to 10.5mm winch cable or rope
- Can double pulling power of your winch
- Handles incorporated for inserting tree straps
- 20,000lb (10 Ton) Capacity
- Tested safely to 15 Tons!
